DragData. Run the numbers. Own the strip.
DragTagEarly beta

Every launch. Measured on the car.

DragTag: an orange sensor shell with the DragData mark and TAG on its face

DragTag is our own sensor. It attaches to your car and gives DragData the hit of every launch, plus the air right where the car sits. No tap in the lanes.

●Watch it work

DragTag feels the hit. Every launch.

0:44
Read the words

This is DragTag, our own sensor. It attaches right to your car.

Every launch, it feels the hit, right when your car feels it.

After the pass, open DragData and visualize the launch alongside the slip.

Add a launch clip, and play any two passes back side by side.

It checks the weather and the air right on the track, the moment you race.

Connect it one time, and on race day there's nothing to tap.

DragTag. In early beta now.

●What it reads

The hit, the air and your page.

  1. The hit

    How hard the car leaves, in g, and the shape of the launch. Each one lands on its pass, beside the slip.

  2. The air

    Air pressure and humidity right at the car, saved on the tag every few minutes, and its temperature checked against the weather around it.

  3. Your page

    Turn on Show my launches and each car’s best launch shows on your racer page, marked DragTag.

●Your iPhone or DragTag?

Start with your phone. Step up to the tag.

Your iPhone can measure your launches today, right in the app. DragTag is for when you want the car’s own numbers.

Your iPhoneToday

  • Included in the DragData iPhone app, with nothing to buy
  • Has to ride solid: a mount or a pocket, never loose on a seat
  • Feels what the phone feels, so a soft mount softens the hit
  • Reads the hit in less detail than DragTag
  • iPhone only for now, and no air readings

DragTagEarly beta

  • Mounted to the car, so it feels the car itself
  • Reads the hit in finer detail, and keeps going down the track
  • Reads the air at the car too
  • Picked up by whichever crew phone is nearby
  • Nothing to remember in the lanes

Every launch says what measured it, iPhone or DragTag, on your passes and your racer page, so nobody compares one with the other by mistake.

●The shell

Our design. Built to ride on the car.

The first shells are our own design. Orange, so you can find it in the trailer.

  • Reinforced slots on both ends to mount it solid
  • A vent over the sensor, so it reads the real air
  • No metal grommets or loose screws to rattle off
DragTag from above: the orange shell, a slot at each end and a round vent on its face
●On race day

Set it once. Then just race.

  1. Connect it once

    Pair it with DragData one time. After that, your phone picks it up whenever the app is open nearby.

  2. Race

    It gets ready on race days by itself. There’s nothing to tap in the lanes.

  3. Look after the pass

    Open DragData and the launch is on the pass, its curve right next to your slip.

●Questions racers ask

Straight answers.

Can I buy one?

Not yet. DragTag is in early beta development, and we’re testing the first ones on our own cars.

Do I need one to measure launches?

No. Your iPhone can measure them today, riding in a mount or a pocket. DragTag stays on the car and reads the hit in finer detail. Each launch is marked with what measured it.

Does my crew have to do anything?

No. Anyone on your crew with DragData open near the car picks up its readings, so nobody has to remember.

Are my launches public?

Only if you say so. Show my launches is off until you turn it on, and Keep my times private hides it too.

DragTag is in early beta development and isn’t for sale yet. What it looks like and what it does may change before it is.

●Your next pass starts here

Get in the LANE

Stop losing your data, your slips, your rank. Store your information like a professional.